The Rook Featured at 31st Annual SWAT Round-Up International

November 19, 2013 at 10:18 AMRing Power

Ring Power Tactical Solutions was on hand for the 31st Annual Swat Round-up International in Orlando, Fla., Nov. 11-14th.

More than just a training event, the SWAT Round-Up was an opportunity for operators across the globe to come together as one and learn from each other. Law enforcement teams competed in numerous training events simulating real life scenarios. Other training events emphasized weapon expertise and physical fitness.

In addition to the many training opportunities available, Law enforcement personnel from around the world had the opportunity to meet and talk with Ring Power’s Tactical Solutions team and see The Rook Armored Critical Incident Vehicle in person. Attendees were impressed with The Rook’s versatility and other capabilities. Several even inquired about obtaining one for their agency.

About The Rook Armored Critical Incident Vehicle

The Rook Vehicle is custom designed and fabricated by Ring Power Corporation, the North and Central Florida Caterpillar® dealer. Utilizing the powerful Cat® 287C Multi-Terrain Loader with 84 gross HP engine, 13,000 lbs. operating weight, rugged wide rubber tracks, dual joystick controls, and enclosed cab with air conditioning/heat and operator comfort seat, custom installed bullet-proof glass, and NIJ Level IV armor cab reinforcement fabrication.

When law enforcement officers are called to any emergency situation - they are prepared for the worst case scenario. Whether dealing with a hostage rescue, barricaded suspects, riot scene, or natural disaster having the right defensive equipment is critical. The Rook is custom designed with mission specific attachments that increase job safety, while also improving the ease and speed of changing attachments.

Posted in: Tactical Solutions

Tags: , ,

Pennsylvania State Police test The Rook's Gas Ram Attachment

January 30, 2013 at 12:16 PMRing Power

 

The Pennsylvania State Police tested out The Rook’s Gas Ram attachment Jan. 29 at Ring Power Corporate Headquarters in St. Augustine, Fla.

The Gas Ram Attachment works in conjunction with the Hydraulic Breach Ram. Law enforcement officers can use the Hydraulic Breaching Ram to create an opening in a structure. The Gas Ram attachment can then be used to deploy various gasses used by SWAT Teams to assist with removing a suspect from the structure.  

During testing the Pennsylvania State Police Special Forces Unit used the attachment to deploy a smoke bomb.

The Rook Armored Critical Incident Vehicle, designed and manufactured by Ring Power Corporation, comes standard with the Hydraulic Breaching Ram. Various other attachments are available to assist law enforcement with different emergency situations.

For more information on The Rook, click here or contact Shaun Mitchell at 904.494.7636.

Posted in: Tactical Solutions

Tags: , ,

SWAT Teams Conduct Training Drills with The Rook

January 25, 2013 at 12:32 PMRing Power

 

SWAT teams from around Northeast Florida conducted training drills with The Rook Armored Critical Incident Vehicle in Ponte Vedra, Fla., Jan. 23.

The Rook Armored Critical Incident Vehicle is designed and manufactured by Ring Power's Tactical Solutions division.

The valuable training allowed area law enforcement the opportunity to experience The Rook in action and train for emergency situations.

The training took place at an old shopping center that is slated to be demolished and rebuilt. Since it was already going to be destroyed,  law enforcement officials were granted use of the property to train — and do some damage.

The Rook utilizes a powerful Cat 287C Multi-Terrain Loader with an 84 gross HP engine, 13,000 lbs. operating weight, rugged wide rubber tracks, dual joystick controls and an enclosed cab. It is equipped with custom installed bullet-proof glass and NIJ Level IV armor cab reinforcement fabrication.

SWAT Teams practiced entering a second story building using The Rook’s Armored Deployment Platform. The ADP can be raised to 11 feet, allowing officers to gain entry to a second story building without having to work their way up the stairs. The ADP is equipped with four locking gun ports, four bullet proof glass sight ports, and video cameras attached to the front of the platform with video feed to the equipment operator.  

SWAT Teams also practiced using the standard Hydraulic Breaching Ram attachment. The HBR delivers 6,500 psi of pressure and much more power than a traditional hand-carried ram. It can be used to breach block walls, reinforced steel doors, wood and concrete, and windows protected by burglar bars. The ram is equipped with four low-light video and one infrared forward view cameras recessed into the end – one on each side and one in front-giving the operator a 360° view of the breaching area. The video images are transmitted to the viewing screen inside the cab with the operator.

The Grapple Claw attachment was also used during the training. The GC and can be utilized to gain access to attics where suspects might be trying to hide or seek protection from ground level exposure. With 4,500 lbs. of lifting capacity, use of the grapple claws in removing fortified doors, burglar bars, or exterior shrubbery can simplify access for armed officers. The grapple claw also aides in disaster relief efforts with the ability to remove debris from streets for emergency responders’ access.

For more information on The Rook, click here or contact Shaun Mitchell at 904.494.7636.

 

Posted in: Tactical Solutions

Tags: , , , , ,